Description
Can-Air Blue Aeration System
- Energy-efficient Can-Air piston compressor with air inlet filter.
- Pond Pro weighted tubing
- Can-Air diffuser Assemblies with weighted base.
- All fittings and clamps necessary to assemble your system.
- Multiple diffuser systems include a manifold with valves to control air flow to each diffuser.
- 25% more diffuser area than most systems out there.
Our compressors and the associated cooling fans are available in 120 or 240 volt
Advantages of using a Can-Air Aeration System
- Made in North America
- No floating equipment or electricity in the water
- Can-Air Aeration will improve water quality by moving water slowly over the bottom substrate of the pond. Phosphates are reduced by up to 95% in many cases.
- Can-Air systems can aerate for as little as is cost effective to purchase and operate for larger surface areas. These systems can effectively de-stratify and aerate deep lakes with much lower equipment costs and energy consumption. Can-Air systems are the most efficient on the market.
- Easy set up and low maintenance. Most maintenance and inspection may be conducted onshore.
If there is no aeration currently in your fish pond, the diffuser should be lowered roughly half the depth, and then slowly lowered all the way to the bottom over the next few weeks at a rate of 2 feet every other week until it is at the pond bottom
If the diffuser is lowered to the bottom right away you risk stirring up toxic gases that could kill your fish. Lowering it slowly over time will eliminate this risk
Our aeration sizing recommendations to improve water quality and keep fish alive in cold & warm climates.
|
Area Covered by 1 Can-Air Blue Diffuser |
|||
Northern Climates |
Southern Climates | |||
Pond Depth |
Good Ponds/Preventative |
Eutrophic/Problem Ponds |
Good Ponds/Preventative |
Eutrophic/Problem Ponds |
5-8 |
65’ x 65’ |
45’ x 45’ |
75' x 75' |
55' x 55' |
9-12 |
125’ x 125’ |
85’ x 85’ |
145' x 145' | 100' x 100' |
13-15 |
160’ x 160’ |
125’ x 125’ |
185' x185' | 145' x 145' |
16-20 |
210’ x 210’ |
160’ x 160’ |
235' x235 |
180' x 180' |
20+ |
290’ x 290’ |
220’ x 220’ |
325' x 325' |
245' x 245 |
30+ |
320' x 320' |
265' x 265' |
360' x 360' | 300' x 300' |
System Components
Can-Air 1 |
Can-Air 2 |
Can-Air 3 |
(1) Pond Pro CA-55 Compressor w/ heatline & fittings assembled (1) Compressor shelf w/ cooling fan/cord (1) 100’ 3/8” sinking airline (1) Can-Air Blue Diffuser Required Fittings
|
(1) Pond Pro CA-65 Compressor w/ heatline & fittings assembled (1) 2-way manifold (1) Compressor shelf w/ cooling fan/cord (2) 100’ 3/8” sinking airline (2) Can-Air Blue Diffusers Required Fittings |
(1) Pond Pro CA-125 Compressor w/ heatline & fittings assembled (1) 3-way manifold (1) Compressor shelf w/ cooling fan/cord (3) 100’ 3/8” sinking airline (3) Can-Air Blue Diffusers Required fittings |
Can-Air 4 |
Can-Air 5 |
Can-Air 6 |
(1) Pond Pro CA-150 Compressor w/ heatline & fittings assembled (1) 4-way manifold (1) Compressor shelf w/ cooling fan/cord (4) 100’ 3/8” sinking airline (4)Can-Air Blue Diffuser Required Fittings
|
(1) Pond Pro CA-65 Compressor w/ heatline & fittings assembled (1) Pond Pro CA-125 Compressor w/ heatline & fittings assembled (1) 3-way manifold (1) 2-way manifold (2) Compressor shelf w/ cooling fan/cord (5) 100’ 3/8” sinking airline (5) Can-Air Blue Diffusers Required Fittings
|
(2) Pond Pro CA-125 Compressor w/ heatline & fittings assembled (2) 3-way manifold (2) Compressor shelf w/ cooling fan/cord (6) 100’ 3/8” sinking airline (6) Can-Air Bue Diffusers Required fittings |