Description
Can-Air Mega Bottom Diffused Aeration System for Maximum Aeration for your Pond, lake, Dugout, or Harsher Industrial Lagoon!
Check out one of our BIGGEST bottom diffuser to join our Can-Air lineup!! The Can-Air MEGA Pond or Lake Aeration system is one of the largest most efficient systems we sell. Designed for the US, this aeration diffuser lands upright when tossed into the pond or lake every time! The Mega diffuser is up to 50% larger than most of our competitors. Larger diffusers= more water movement and greater aeration efficiency!
The NEW Can-Air Mega diffuser offers the same reliable aeration a sour tried and true Can-Air systems. This Can-Air Mega aeration system is recommended for ponds and lakes larger than 3+ acres in size!
Description:
- Durable Stainless Steel Base
- Self righting; just toss some hose in water and then the diffuser
- No gravel needed in the base to sink it - just lower into the water
- Easy to assemble and install
- Made in North America
- No electricity in the water. This can be especially important where swimming is allowed.
- No floating equipment at the surface. Boating is not hindered and the natural view of the lake can be enjoyed.
- Can-Air Aeration will improve water quality by moving water slowly over the bottom substrate of the pond. Phosphates are reduced by up to 95% in many cases.
- Can-Air systems can aerate for as little as is cost effective to purchase and operate for larger surface areas. These systems can effectively de-stratify and aerate deep lakes with much lower equipment costs and energy consumption. Can-Air systems are the most efficient on the market.
- Low maintenance. Most maintenance and inspection may be conducted onshore. Rocking piston compressors do not require internal maintenance as often as other compressors.
- Can-Air Aeration Systems
**NOTE** For Warranty To Be Valid, All Systems Sold With No Cabinet Must Be:
A) out of the elements (snow, wind, dust)
B) be kept off the ground (on a shelf or post)
C) have a cooling fan blowing hot air AWAY from compressor out of the enclosure
Advantages Of Using A Can-Air Aeration System
- Made in North America from family businesses.
- Energy-efficient tech-aire piston compressor with air inlet filter. One year standard warranty two year warranty when purchased with cabinet.
- Pond Pro weighted tubing
- Can-Air diffuser Assemblies with weighted base.
- All fittings and clamps necessary to assemble your system.
- Multiple diffuser systems include a manifold with valves to control air flow to each diffuser.
- 50% more diffuser area than most systems out there.
Our compressors and the associated cooling fans are available in 120 or 240 volt
If there is no aeration currently in your fish pond, the diffuser should be lowered roughly half the depth, and then slowly lowered all the way to the bottom over the next few weeks at a rate of 2 feet every other week until it is at the pond bottom
If the diffuser is lowered to the bottom right away you risk stirring up toxic gases that could kill your fish. Lowering it slowly over time will eliminate this risk
For easy removal of the diffuser for mainetence, consider adding a float kit to the diffuser which can make retrieval simple and quick!
Our Aeration Sizing Recommendations To Improve Water Quality And Keep Fish Alive in Varying Climates:
|
Area Covered by 1 Can-Air Mega Diffuser |
|||
Northern Climates |
Southern Climates | |||
Pond Depth |
Good Ponds/Preventative |
Eutrophic/Problem Ponds |
Good Ponds/Preventative |
Eutrophic/Problem Ponds |
5-8 |
80’ x 80’ |
55’ x 55’ |
90' x 90' |
75' x 75' |
9-12 |
155’ x 155’ |
105’ x 105’ |
180' x 180' | 150' x 150' |
13-15 |
200’ x 200’ |
155’ x 155’ |
230' x 230' | 190' x 190' |
16-20 |
260’ x 260’ |
190’ x 190’ |
290' x 290' |
240' x 240' |
20+ |
360’ x 360’ |
275’ x 275’ |
400' x 400' |
330' x 330 |
30+ |
400' x 400' |
330' x 330' |
445' x 445' | 370' x 370' |
Can-Air 1 |
Can-Air 2 |
Can-Air 3 |
(1) Can-Air Cabinet with CA-65 Compressor & fan assembled (1) 2-way manifold with heatlines (1) 100’ 3/8” sinking airline (1) Can-Air Mega Diffuser Required Fittings |
(1) Can-Air Cabinet with CA-125 Compressor & fan assembled (1) 3-way manifold with heatlines (2) 100’ 3/8” sinking airline (2) Can-Air Mega Diffuser Required Fittings |
(1) Can-Air Cabinet with CA-150 Compressor and fan assembled (1) 4-way manifold with heatlines (3) 100’ 3/8” sinking airline (3) Can-Air Mega Diffusers Required Fittings |
Can-Air 4 |
Can-Air 5 |
Can-Air 6 |
(2) Can-Air Cabinet with CA-125 Compressor & fan assembled (2) 3-way manifolds with heatlines (4) 100’ 3/8” sinking airline (4) Can-Air Mega Diffuser Required Fittings |
(1) Can-Air Cabinet with CA-125 Compressor & fan assembled (1) Can-Air Cabinet with CA-150 Compressor & fan assembled (1) 3-way Manifold (1) 4-way manifold (5) 100’ 3/8” sinking airline (5) Can-Air Mega Diffuser Required Fittings |
(2) Can-Air Cabinet with CA-150 Compressor and fan assembled (2) 4-way manifold (6) 100’ 3/8” sinking airline (6) Can-Air Mega Diffusers Required Fittings |
If you need additional airline for longer airline stretches, purchase extra 100' rolls of 1/2" ID airline!
For large ponds, lakes, wastewater lagoons, mine pits etc. contact us for custom aeration designs and quotes!